1 / 4
Makita 18v battery holder for HoneyComb Wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a battery holder, that will fit the honeycomb storage wall
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 283
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
I made a battery holder for Makita 18v batteries.
The peg for the honeycomb storage wall is printed separate and then inserted from the front of the battery holder to make printing less cumbersome.
This is the unbranded version. I have made one with embossed logo and separate text that fit into it - but I didn't know if it was ok to upload here.
Tips are appreciated if you use this model for commercial use :-)