Smart fortwo 2015 rear air diffuser cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the screw cover for the skirt/air diffuser of a smart fortwo 2015 (probably the whole generation too). This is…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
This is the screw cover for the skirt/air diffuser of a smart fortwo 2015 (probably the whole generation too). This is the small cover that are under the bigger one that cover the bumper screw.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Doesn't Matter
Supports:
Doesn't Matter
25% gyroid
Filament: Bambulab ASA
Notes:
No support but ASA is really recommended for long time fix.
Probably some adjustment needed :
If using an FDM printer, you will most likely need to sand/smooth the claw type teeth so it doesn't break and slide easily on the retaining latch. You might even need a touch of glue to make it really hold, if you lost that that, it is mostly due to wear and can't be retained (like mine). The screw can also be misplaced and be the reason the original and printed part can't be fully inserted.
Original on top
Original on top
Category: Vehicles