Elegoo Filter Holder for Bambu P1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the Elegoo Air Filter (Air Purifier). It is designed to be mounted in the bottom left hand and/or…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder for the Elegoo Air Filter (Air Purifier). It is designed to be mounted in the bottom left hand and/or right hand corner of a P1S. This is used to filter out odors from various filaments. The P1S has a chamber fan/filter but these can be used to filter the air in the enclosure instead of sending the air out of the enclosure. This holder should be secured against the back wall, side wall, and bottom using double faced tape, Make sure it is out of the way of a plate. Could be used in various other 3D printers.
The Elegoo filter can be found at: https://www.amazon.com/ELEGOO-Purifier-Battery-Activated-Printer%EF%BC%88Pack/dp/B095BTW744/ref=asc_df_B095BTW744/?tag=hyprod-20&linkCode=df0&hvadid=647308226327&hvpos=&hvnetw=g&hvrand=13545117837595801346&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9020165&hvtargid=pla-1409880341191&mcid=25b24136ba8935fe98f3471ad53f6130&th=1
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
No
0.2 mm
Infill:
15%
Category: 3D Printer Accessories