Sunglasses Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for up to 5 glasses/sunglasses. The 3MF design has been split into 2 pieces (using Bambu Slicer cut…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder for up to 5 glasses/sunglasses. The 3MF design has been split into 2 pieces (using Bambu Slicer cut with 2 added snaps) so they can be printed with no supports. They printed fine, but I would change a setting when printing the base. The curved areas on the base might come out better with adaptive layering. Also the snaps where not too tight so I added a few drops of CA glue (Krazy glue) when assembling the 2 parts.
I have included an STL file of the full assembly (uncut). If you want to recut it and/or change the snaps, you should cut the model at exactly 7 inches (177.8 mm).
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
No
0.12 mm
Infill:
15%
Category: Organization