Ruger PC Carbine Flared Magwell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got the inspiration for this from rpf2000. I wanted a Ruger PC9 magwell, but didn't exactly like the design. I…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 309
- Wydruki
- 0
- Wyświetlenia
- 2054
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I got the inspiration for this from rpf2000. I wanted a Ruger PC9 magwell, but didn't exactly like the design. I created this, with a wider angle, tighter fit, and a smoother look. With this magwell, you will have no problem reloading your Ruger PC9 quickly. I have tested this, I just don't have photos. If you have 10rnd magazines, you may want to cut a portion off of the bottom in your slicer to make the magwell shorter. 50% infill is a must, or the arms have risk of breakage. There is a little difficulty putting the magwell on the gun, but it wont come off if you do not want it to. The magwell may get stuck partway when you put it on, simply pull out on it, and push down. If you have any questions or needed edits, leave a comment. I spent a lot of time in Fusion 360 for this, please post a make.
Note: this is not an actual remix of Ruger PCC Magwell by rpf2000, it is made from scratch, only borrowing a few dimensions from rpf2000's design.
Print Settings
Printer:
Anycubic i3 Mega S
Rafts:
No
Yes
Resolution:
.2
50%
Filament: MatterHackers PLA Black
Notes:
I will add a shorter magwell for 10rnd magazines soon.
Edit: There is now a shorter magwell.
If needed, I will add a new magwell for the chassis model.
Category: 3D Printing