Airsoft Glock wall magazine holder 4x
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed up this holder / hanger for 4x airsoft Glock magazines. Magazines hang about 4mm from wall perpendicular to…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 962
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I designed up this holder / hanger for 4x airsoft Glock magazines. Magazines hang about 4mm from wall perpendicular to this wall, bb / follower side to wall.
This holder is compatible with all standard WE / KJW / TM magazines for G17, G18, G26, G19 etc ... Basically all standard G double-stack magazines.
What You can seen in the picture is WE glock 17 with standard G17 mags.
Info:
Width between prongs is 23.5mm. Angle between wall and base plate of magazine is 108 degrees.
Printing:
ORIENTATION: Best to print upside down, this way it leaves very nice surface on top, where magazines rest.
SUPPORT: No support needed
MATERIAL: PLA,PET,PETG,ABS ...
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
260
Infill:
20
Category: Organization