Precision thumbwheel for CTC A10s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, this is precision thumbweel for CTC A10s (CR10 clone)This wheel was inspired by idig3d's CR-10 Precision…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello, this is precision thumbweel for CTC A10s (CR10 clone)
This wheel was inspired by idig3d's CR-10 Precision Thumbdial
I tried this model but it would not fit. CTC uses slightly different original dial Oiginal has 18 small protrusions and overall diameter is 18.3mm. I designed my own thumbwheel for this printer.
If You are not sure please print just middle part first and test. If You like this thumbwheel but it does not fit on your printer, feel free to download model and change it as you see fit.
As on idig3d's, move by one section with bigger marks is 0.1mm on bed. Smaller sections mark 0.02mm.
Designed in Fusion 360: Here is Thumbwheel Here is middle part for test-fit
Enjoy.
Print Settings
Printer:
CTC A10s
Rafts:
No
Yes
Resolution:
0.15
15%
Filament: Gembird PLA Silver
Notes:
Slicer = CURA
bed = 60C
Hot end = 200C
Category: 3D Printer Parts