BambuLab X1C 3" Ventilation Duct Adapter (Press Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to attach a 3" ventilation hose to the back of the BambuLab X1C at the exhaust port
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Just like the title says - this is an adapter to attach a 3" ventilation hose to the back of the X1C (it may also work with the enclosed version of the P1, not sure as I don't have a way to test it).
I printed mine in PETG with a .4mm nozzle though I'd imaging PLA would work just fine as well.
Requires 3 - 2.5mm x 10mm (or similar length) screws. Simply screw them all the way into the provided hole - they then line up with the 3 mystery holes in the back of the printer. They simply press-fit into the holes and the threads “catch” the edges of the holes to hold the adapter in place.
If you found my work useful, stop by my BuyMeACoffee page!