1 / 1
Easy 13/Lucky 13 Posable feet with magnet hole 10x4x2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix that added a hole for a 10x4x2 mm magnet. No glue required
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Tested with easy 13
Uses the same connector (I tried the easy 13 one) and toe
I used these feet rather than the original because the original isn't quite big enough to add the magnets to while keeping the connector unchanged
Don't need glue, but the bridging and size means it's a bit finicky to print.
My other version for 6x3 magnet: https://www.printables.com/model/1010916-easy-13lucky-13-posable-feet-with-magnet-hole