1 / 4
Rod holder / wall mount for 24mm / 28mm filament rod — zdjęcie 1
1 / 4

Rod holder / wall mount for 24mm / 28mm filament rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder/wall mount for filament storage etc. for 24 / 28mm rods

Ocena
5 / 5
Polubienia
318
Pobrania
589
Wydruki
3
Wyświetlenia
2013
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Wall mount/rod holder designed for 24 / 28mm rods.

Characteristics:

  • main slot with 23,8 / 27,8mm diameter for tight fit
  • 2 holes for ∅5 screws and ∅10 washers
  • thin "backplate" (1mm ~ 2 walls) that separate wall and rod
  • should be easy to rescale → check photo for holes position ;)

 

For maximum strength it's recommended to print standing (orientation as in 28mm STL file), with higher number of walls and infill (gyroid or similar).

For high load and higher temperatures PETG/ABS/ASA seems like optimal minimum.

Tagi