Obtuse Mag Holder V320
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a P320 mag, at an angle
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
See Zip file for all files including STL & STEP.
Obtuse Mag Holder, V320
by Maverick0197
Holds a mag, at an angle.
Designed off of Sig P320 9mm mags, not sure what else it will fit.
Inspired by the Recovery Tactical MG9 Angled Mag Pouch.
Variants:
A has a hook on the front acting as a hand stop.
B has no hook and is a little easier to print.
Hardware:
1x M4x30mm bolt and nut for picatinny mounting
1x Glock Magazine Catch Spring (38mm x 0.055"/1.3mm piano wire)
My print settings:
*I have pre-oriented all of the parts to what I think will give you the best results, but you know your printer best.
50% gyroid infill, 6 walls, 5 top & bottom, supports on
Update 02/09/2025:
Increased the thickness of the "Clamp" near the bolt to help prevent cracking.