Pruning Shear Holster(for Gardenite Ratchet Anvil Shears)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holster for Gardenite Ratchet Anvil Pruning Shears.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holster for Gardenite Ratchet Anvil Pruning Shears. I'm not comfortable sticking the shears in a pocket, but I need to keep them close when I'm doing yard work, so I made this.
10/29/19: I added a newer version that is much slimmer. I also updated the print settings below
Print instructions
Supports: No
Resolution: 0.15mm
Infill: 8%
Notes:
Version 2 needs no supports. The first version might need supports, but you shouldn't print that version anyway
Use just enough infill to support the top layers
Use 2 perimeters
I used PETG. PLA should be fine too. Print as hot as possible to get good layer bonding
How I Designed This
I scanned the shears on a flatbed scanner. I used that image as a template in Fusion 360 and sketched around it with splines.
Because of how I designed it, the Gardenite shears fit best when inserted in the "correct" direction and this may not fit other shears as well.