Pixel 9 Pro Magsafe Case with Cash/Card Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in TPU. Case for the Pixel 9 Pro that includes various cutouts.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 845
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for 98A TPU. 2 walls, 35% infill, 3 top/bottom layers, tree supports, 0.2mm layer height
Includes a cut out for a Magsafe adapter ring, the SIM ejector that came with the phone, one credit card or ID and 1-2 emergency bills. Bill need to be folded as shown in the picture.
Designed to have a good balance between strength and thinness for better wireless charging efficiency.
I recommend you put the camera bumper ring on the phone first before putting the phone in the case. Once you manipulate the bumper ring gasket onto the case it stays together without further adhesives.
If you frequently remove your phone from your case, I recommend a few careful drops of super glue to hold the camera bumper in place as it can be finicky when the phone is removed.
You can support me by purchasing the supplies for this project with the following links. Thank you!
MagSafe Adapter Ring: https://amzn.to/3BdyVow
98A TPU: https://amzn.to/3MNp5MB
Desk Charger: https://amzn.to/3MSLmZa
Car Charger: https://amzn.to/3zptjqr