Small modular garden fence for around plants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small faux picket fence for around plants. Two models, a shorter one with a longer spike and a taller one with two…
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Small faux picket fence for around plants.
Two models, a shorter one with a longer spike and a taller one with two smaller spikes. Pictured is the taller with two spike model.
Model is modular to allow you to make as many as you need to surround the plant. The ends have a small bump on them which corresponds to a small lip inside the piece to clip into. Some force may be required to clip them together however even unclipped they hold together fairly well. On the Prusa MK3S I need print at .20 maximum layer height or the lip inside was not produced.
Print in something UV and weather resistant like PETG or ASA. I printed with 50% infill as I want it to survive the odd whipper snipper shack (the motivation for surrounding the plants to begin with.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
.20
Infill:
50%
Filament:
Pursament PETG Signal White
Category: Outdoor & Garden