SC2 Hatchery > Lair > Hive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hatchery, Lair and Hive meshs from Star Craft 2: Heart of the Swarm. All three are in the same STL. Disclaimer: This…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 208
- Wydruki
- 0
- Wyświetlenia
- 924
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Hatchery, Lair and Hive meshs from Star Craft 2: Heart of the Swarm.
All three are in the same STL.
Disclaimer:
This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly prohibited under the Blizzard EULA but attempting to profit via producing for sale, claiming ownership of the model or attempting to obtain advantage from production of this model is. Don't do it! This model is supplied for personal use only.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
.10
Infill:
15%
Filament:
fillamentum PLA Extrafill PLA Chocolate Brown
Notes:
On FDM/FFF printer you will get a lot of stringing from between the spires, a blast with a hot hairdryer or heat gun (be careful as the spires are fairly thin on the Hatchery) should do the trick to clean that up
Category: Toys & Games