Wii Balance Board Foot Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's a few "replacement feet" floating around, but they're ACTUAL replacements for the built-in feet of the balance…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 199
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
There's a few "replacement feet" floating around, but they're ACTUAL replacements for the built-in feet of the balance board. Those are different than these, which are footextensions to make the board taller. They're supposed to just snugly fit over the actual feet.
The real thing has a little rubber bit on the bottom. I edited tgryc's design so you can print the rubbery bit separately in like TPU or flexible PHA. No glue required, it just pops in.
In the real original feet, the three little "clip" looking things around the outside are actually also supposed to be rubbery bits, to help hold it on. If I have time, I'll come back to this and edit those into separate pieces as well.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
0.15
Infill:
100
Category: DIY