Bigfoot Night Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lithophane night light featuring your favorite elusive cryptid. 2 different sizes can be found in the print profiles.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A lithophane night light featuring your favorite elusive cryptid. 2 different sizes can be found in the print profiles.
Here are links to the night light and LED bulbs I used for this project, found on Amazon.
LED Bulbs - I chose these bulbs primarily since they are LED they wouldn't generate enough heat to warp the PLA and I really liked the warm white effect they provide.
The litho shade was designed with the night light holder fit to the dimensions of the night light I had chosen to use. The clip section is 16.82mm wide and 4.72mm thick. If you are not using the linked light above, as long as it's ~ 17mm in diameter where the bulb is held it should work.
The lithophanes pictured were printed in Polyterra Cotton White. Previously I was using Overture white but really like the way matte finish impacts details for these.