1 / 2
A1UP Button Replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket will screw in where the original encoder board was. You can screw in 2 standard arcade push buttons. The smaller buttons are pushed from behind where the original toggle switches were before screwing in the bracket with the buttons. The buttons are made hollow to allow light through if using light up buttons.
I printed in regular PLA.
Infill: 20%
Would suggest using a tree support for the buttons.
Resolution:
0.2 for bracket is probably fine.
0.12 for buttons with text to ensure detail comes through.