Circle slicer_v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a circle slicer, Mainly used for cutting paper.
（Maximum circle diameter ≈30mm Minimum circle diameter ≈6mm）
update : To prevent slipping during cutting. Added grip, It is easier to cut. Add the bottom texture to increase friction. Or you can attach double-sided adhesive stickers at the bottom.
update file_v1.1 (other parts_1.1)
installation instruction is shown in the picture.
special tips:
I need a wallpaper blade, and break off two parts with plier (see picture. ) after inserting blade.(Cut your hand carefully)
You'd batter to fixed the four corners of the paper when cutting paper, and hold center axis cut circle.
( clockwise rotation to loosen anticlockwise rotation to tighten used for fixed dimension when adjustment dimension)
This model was printed using PLA. (fill in 10%，using a lower layer hight (0.15/0.2mm)，no support)