Minimalist Spool Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Less than 35 grams of filament at 100% infill. Designed for a mini-drybox setup (see description for details)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Spool Roller designed for converting this container → https://www.amazon.com/dp/B0BHVT9PV1 into a filament drybox. -I'm sure it'll work for other containers and use-cases.
Also see the Sensor Bracket designed for this setup here → https://www.printables.com/model/1007350-drybox-sensor-bracket And the Spool Arbor Desiccant Jar here → https://www.printables.com/model/682660-spool-arbor-desiccant-jar-silica-gel-jar
Hardware Required
| Part | Qty |
| 608 Bearings | 2 |
| M5x20 Screws | 2 |
| M5 Nuts | 2 |
Assembly Instructions
Combine the Hardware and Roller sets as shown in the image
Then simply “snap” them into place on the base of the stand.
Efficiency Report
Uses very little material; Here's what it takes to print a full set at 100% infill on my Anycubic Kobra Max (for speed and time-estimation reference, print times will vary by printer)
