The Bambu Lab External Spool Holder Stand.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a sturdy stand for your Bambu Lab A1 external spool holder to clamp onto.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 27.03.24: V2 Spool centred
I needed to fit the spool holder into a tight space, servicing the enemy! I mean the Anycubic Kobra S1.
V2 centres the spool so it doesn't go outside the base footprint.
…
You are supposed to attach this spool arm to the top bar of your A1 3DP but because I have my printers situated in bays there is not enough headroom, not to worry though as long as you have some space to the side of your machine you can clamp it onto this handy stand.
I did design quite a few fancier versions but in the end they couldn't hold the 1kg spool weight, so back to the drawing board with the idea that sometimes the simplest answer is the best.
I would recommend a strong infill pattern (Eg gyroid, minimum 10% infill)
Last of my Bambu Lab related parts for the moment.
Although quite specific, I hope it is useful to someone.
--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman
Thanks again for your continued support!