Avanti XS Nose Gear Tire Replacement in VarioShore TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nose Gear Tire Replacement for losing weight of the plane
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
For use with the Sebart Avanti XS 1.9m Retract Gear Set that comes with the plane, this one is the same dimensions as the JP Hobby ER120S Nose Gear wheel though.
Nose Landing Gear Tire Replacement for losing weight of the plane, for a total weight loss of 10 grams is accomplished when replacing the standard tire.
Assembly of the tire is straightforward, it is a tight fit, no worries, this is on purpose so that when all screws are evenly tightened the end result is perfect. Only one important note : the tire should be placed with the printbed side towards the hub rim, the bottom fillet has a slightly larger diameter to better accomodate the hub for a perfect finish when assembled.
Please print with the following settings :
ColorFabb VarioShore TPU @ 250C, 0.16 layer height, 12 top and bottom layers, 6 outline perimeters, gyroid infill of 50 percent.
Respect the speeds and settings for this filament or you will get in trouble :
Suitable only for DirectDrive machines
Nozzle 0.4mm - Extrusion Multiplier 0.50 - Retract Distance 2mm - Retract Speed 900mm/min - Printing Speed 25mm/sec