Makita Battery Charger (DC18RC) Wall Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for mounting a Makita 18v battery changer vertically on the wall.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Description
This bracket allows you to mount a Makita 18v battery charger (DC18RC) on the wall to get it off the shelf/workbench. It includes cutouts to allow air to get to the vent on the back of the charger and circulate under the charger.
Print settings
FIlament: PLA
Infill: 15%
Supports: Yes
Assembly
Slide the top rail into the bracket base notches. You can secure the rail to the base with a small amount of CA glue if you want but I don't think it is necessary. Feed the battery charger cord into the bracket first then slide the charger into the bracket. Attach the bracket to the wall with screws and anchors as appropriate for your wall.