Buck Converter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A press-together case for buck converter that can be mounted. I used it with 24-volt power supply and Pi under my Lack
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 1940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a buck converter to run my PI off of the 24-volt power supply -- picked this one because of the flexibility https://amzn.to/3H38orA . Have a Lack surround and needed to mount the power supply and Pi outside, running the Pi off of the power supply. This case is 2 parts pressed together, no screws are required, and the model has holes in the bottom to attach the case to wherever it sits.
I found the easiest way to put it together is to attach the wires then push everything together.
In the photo it's slightly open so you can see how the top and bottom slide together.