1 / 3
Nightmare on Elm Street - Freddy Krueger Litho Night Light — zdjęcie 1
1 / 3

Nightmare on Elm Street - Freddy Krueger Litho Night Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1… 2… Freddy's coming for you… in this oversized night light litho.

Ocena
0 / 5
Polubienia
19
Pobrania
77
Wydruki
0
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted something visible from a distance so scaled this one to 34.89x169.6x130mm on the build plate.

Here are links to the night light and LED bulbs I used for this project, found on Amazon.

Night Light

LED Bulbs - I chose these bulbs primarily since they are LED they wouldn't generate enough heat to warp the PLA and I really liked the warm white effect they provide.

The litho shade was designed with the night light holder fit to the dimensions of the night light I had chosen to use. The clip section is 16.82mm wide and 4.72mm thick. If you are not using the linked light above, as long as it's ~ 17mm in diameter where the bulb is held it should work.

The lithophane pictured were printed in Polyterra Cotton White. Previously I was using Overture white but really like the way matte finish impacts details for these.

Tagi