Chute for Predator Chipper/Shredder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connecting a bag to the my Harbor Freight wood chipper has always been awkward.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 1237
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Connecting a bag to the my Harbor Freight wood chipper has always been awkward.
This attachment adds a chute that a bag can be tied onto easily.
The top of the chute zip ties to the fastener piece. The bottom zip ties directly to the chipper. The rendered image shows how the chute and fastener are oriented in relation to each other.
8/21/25 update: I added a new support-free version of the chute. There are also some geometry changes that will help the chute maintain stiffness if printed from 95A TPU. My hope is that a TPU version will last longer due to it's ability to absorb impact, but I have not fully tested it yet. Whatever material you use, I'd recommend printing this newer version
Print instructions
Supports: Yes
Resolution: .15
Filament: PETG
Notes:
Print in PETG so this doesn't melt when it gets hot in your shed or garage.
Based on CNC Kitchen's findings, print with 0.15mm - 0.2mm layer heights and 3 perimeters to make this strong.
I have not tested the version with support built in - I made that one after I already printed the chute. I recommend changing the settings of the support block if you can. Set to to print with 1 perimeter and 8% infill to save time and material.