1 / 5
Single Extruder - Dual Color - Salamanders (fusion360)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Salamander model modified with the dual color technique. Each model prints in two part that slide into each other.
- Ocena
- 5 / 5
- Polubienia
- 256
- Pobrania
- 687
- Wydruki
- 9
- Wyświetlenia
- 2564
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 9) (Komentarze: 22)Remiksy (2)Kolekcje (303)Powiązane
The fusion360 file are given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. I also joined a decimated version of the base model in the files, it contains less triangles and is easier to use in your projects.
Printing info:
- Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first then to scale it as you wish.
- Split the model to its parts before printing them separately then, when done, they should simply slide into each other
- Regular supports are recommended for the striped model
- The dotted salamander is more difficult to print than the striped one, you will have to take more time to clean up the underside (removing supports and rounding holes). I recommend using tree supports since they don't cover the holes with a grid like regular support do.
- A brim is recommended for both models as it will help with bed adhesion.
---
Erratum (22/09/24): Added a second salamander model, one with dots