Framework Laptop USB Expansion Card Holder w release buttons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place cover for three USB C expansion / accessory cards for the Framework Laptop - incl. release buttons
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As described above – this is a fully print-in-place model, and includes physical buttons which are used to release the inserted expansion / accessory card.
This case is low profile but fully protects the cards (more than other models in the site here).
This model currently uses a 0.2mm fit tolerance on cards - your printer's tolerance / accuracy may have an impact on how well this works. I've found good success using my Prusa MK3S+ with PETG and some 100% infills to the release buttons.
Not suitable for the RJ45 ethernet adapter.
Feedback welcome!