Jungle themed clock - printable without multi-color printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clock, easy to read for children, printable without multi-color printer
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Recently, I needed a new clock for the house and decided to challenge myself to create it with my 3d printer. I do not have multi-color printing capabilities on my 3d printer, hence I needed to get creative to make it work. Printing the dial and numbers separately and with tight offsets allowed for a good look with sufficient contrast.
I wanted this clock to work well for smaller children who are just learning how to read time. Hence, adding both the hour and minute numbers around the dial allows for an easier read of the exact time.
In the files section there are two dials included: a jungle themed one and a clouds one.
Print settings:
- No special print settings, make sure to print the mount facing up, with supports.
Mounting:
- The cutouts of the numbers need to be glued to the number pieces, all the rest snaps together
- The clock is held together by the screw of the clock mechanism
I used the following mechanism: TFA Dostmann 60.3518.01
More information on my blog.