Shimano BL-M505 brake bleed kit adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I ordered a bleed kit for my Shimano hydraulic brakes. I didnt know I needed the extended kit so the brake oil…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I ordered a bleed kit for my Shimano hydraulic brakes. I didnt know I needed the extended kit so the brake oil container adapter was missing. So I printed my own, which is a fraction in size compared to the official one and it works like a charm!
The brake lever model this was designed for is BL-M505.
Other parts needed:
- Cuttable at least 2mm thick cuttable gasket sheet or rubber or something else that is water tight
Super glue to glue the gasket to the printed part I suggest printing this with a resin printer. FDM can struggle with the very small thread for the brake fluid container.
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
No
Supports:
No
0.05 mm
Filament: Anycubic resin Transparent
Notes:
I printed straight on the print bed to save time.
If you print directly on print bed you probably need to cut away the elephants foot. Otherwise it worked without any post prosessing
How I Designed This
Designed with Fusion360 and sliced with Chitubox
Category: Sport & Outdoors