Nissan X-trail T30 4x4 gearbox oil stick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an oil stick for X-trail T30 4x4 gearbox (2.0 l petrol, QR20DE). The service manual says "measure with…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 804
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an oil stick for X-trail T30 4x4 gearbox (2.0 l petrol, QR20DE). The service manual says "measure with appropriate stick". I found it hard to first dip a stick and then measure it so I made this.The H-notch is at 168 mm deep and L is at 174 mm, as the manual states.
This works only for 4x4 models! 2WD has a different filling hole.
Usage instructions:
- Remove the oil filling cap. It is a 10 mm hexagon screw
- Push the dipstick as deep as it goes
- Take it out and read the result
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Doesn't Matter
Supports:
No
0,3
Infill:
40
Filament:
PETG PETG Transparent
Notes:
Use whatever plastic that does not shrink(!) you have. I used PETG because it was loaded in my printer.
Transparent was a bad color choice because it is hard to see the oil on the stick (oil should be yellowish, not black)As said above, do not use a shrinking material except if you compensate for the shrinking.
Post-Printing
Glue together the two parts with your favorite glue. I used gel like superglue.
You need to measure the correct distance as in the attached picture! I left some extra space in the top part because of printing errors, so if you push the stick all the way to the bottom the distance will be wrong.
How I Designed This
Designed in Fusion360 and sliced with Simplify3D
Category: Automotive