Nissan X-Trail hood support fastening clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As with everyone with a little bit older Japanese car, the fastener for the hood support was broken on my 2006 X-Trail…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 669
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
As with everyone with a little bit older Japanese car, the fastener for the hood support was broken on my 2006 X-Trail T30. So why not model it and make a print?
This part is not 100% same as the original. I placed the V-shaped clip on the edge instead of in the middle. This way it is easier to print because you do not need supports.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Doesn't Matter
Supports:
No
0,2 mm
Infill:
100 %
Filament:
[
](http://www.amazon.com/s?url=search-alias&field-keywords=Polymaker+PC+MAX&tag=thingiverse09-20)[ Polymaker](https://www.amazon.com/PolyLite-Printer-Filament-PLA-2-2lb/dp/B01IAVQIWE?dchild=1&keywords=polymaker+filament&qid=1618268031&sr=8-3&linkCode=ll1&tag=thingiverse09-20&linkId=4324f80ce0a8d9e2bed8c93f7135c03f&language=en_US&ref_=as_li_ss_tl) PC MAX White
Notes:
I used PC MAX filament for maximum strength. Printing temperature 280 C.rnrnPlease use an elastic and durable material for this part because it needs to tolerate lots of wear and tear.
Remove the old clip and pop this is place. I helped the clips by pushing with a screw driver.
How I Designed This
DEsigned in Fusion360, Sliced with Simplify3D
Category: Automotive