Replacement ACE Pro filament guides with PTFE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement ACE Pro filament guides with PTFE (with cutting guides)
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 251
- Wydruki
- 1
- Wyświetlenia
- 1841
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Given time the filament can grind a notch in the stock orange filament guides for the ACE pro.
these guides serve as replacement guides should you wish to replace your worn guides, or just simply upgrade.
They make use of the 0.4mm PTFE tubing that your ACE/Kobra3 printer come with and also includes a cut guide to allow you to make nice cuts at correct lengths and angles.
Simply push the tube through the insert (may require some twisting) then put the cut guides on either side lining up the little circle indentations and run a sharp knife of razor down the edge for a nice cut.
You will need to print 4 inserts and one of each cut guide.