1 / 4
SV08 Meanwell LRS350 Power Supply Mount - No wiring modification edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design mounts a Meanwell LRS350-24 PS in the Sovol SV08 in a way that eliminates cutting or modifying wiring.
- Ocena
- 4,333 / 5
- Polubienia
- 55
- Pobrania
- 319
- Wydruki
- 6
- Wyświetlenia
- 1464
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 20)Remiksy (1)Kolekcje (106)Powiązane
Hardware needed to install
- Cap/Button Screw M4x6 - 8pcs (Screw on PSU)
- Cap/Button Screw M5x10 - 2pcs
- T Slot Nut 2020 M5 - 2pcs
- Factory power supply mount screws - 2pcs
Print as oriented in the slicer picture. Print 2 brackets and one plate. No supports. Use ABS.
Note that the photo of the one in my printer is the prototype. This released version moves the PS 4mm to clear the screw hole below the tap terminals, and the plate has been redesigned to save some material.