SK Cube 120 mm Auxiliary Fan Ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptation of JackJack3231's Voron V0 Auxiliary Fan Ducts for the SecKit SK Cube, specifically the 120 mm version.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of JackJack3231's 120 mm Voron V0 Auxiliary Fan Duct to support the SecKit SK Cube. It has been adapted to attach to the Y-axis rails using M3 screws and M3 heat-set inserts.
Based on tests, these should clear all of the standard motor mounts, print head, and Y-axis rail carriages. However, I built it based on a beta SK Cube kit so things may have slightly changed with the production model.
Printing tips
This design should not require any supports or any special print settings as the basic design already includes pre-modeled supports for the duct. If using an enclosed SK Cube, a heat-resistant plastic should be used, though since these are not strongly load bearing PETG should be sufficient. The design is intended to use short M3 heat-set inserts and M3x8 socket cap head screws.
Wiring path is at the user's discretion based on whichever of the cable cutouts have sufficient space.