Elinchrom-like Bajonett, Small Reflektor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small Flash Reflektor with Bajonett. Simplified as all rounds are now 45° angles for print with minimal support
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
So, I needed a reflector for my Elinchrom Ranger.
No retailer nearby and photoshoot coming up soon.
Desperate circumstances result in desperate solutions.
Measured the safety-cap and the Bajonett it get attached with.
Created a version of the bajonett hole that is easier to print and harder to f* up by making it angled.
Those of you with some experience and some common sense might notice that the layer lines are exactly perpendicular to the expected load. A flaw I fixed for my needs by melting some staples into the weak-points, using a soldering iron.
Certainly not a swiss precision solution, but it keeps light from spilling just fine.