Multi Color Chameleon Wall Art / Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No MMU/AMS or supports needed. Inserts snap into place, choose any filament. Prints with or without hooks.
- Ocena
- 4,96 / 5
- Polubienia
- 643
- Pobrania
- 1124
- Wydruki
- 27
- Wyświetlenia
- 8701
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Print this as a key rack or just as a piece of wall art, there are files for use with or without the hooks. Inserts can be printed in whatever filaments you choose. Designed to print without support structure. Make sure your slicer does not generate any in the various pockets.
Consider using adaptive layer heights for best quality. Inspect all clips and pockets for filament blobs before snapping together. Dry filament will go a long ways towards a successful project, as the clearances are somewhat tight and any stringing will show up on the textured surface. Note the callouts in the file names for parts with 100% recommended infill.