PrinterTag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tag for identifying your printers, with space for an IP address label
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I have two Ender 3 V2s that look almost identical at a glance. I wanted a way to tell them apart, as well as somewhere to display each one's IP address. Thus, the PrinterTag was born!
The PrinterTag is designed to be fastened to aluminum extrusions using an 8mm M5 screw and matching T-slot nut. You could also use double-sided tape. The flat surface is 70x15mm, perfect for Brother 12mm labels.
Only numbers 1 and 2 are currently included, along with the .f3d file so you can make your own. Change the font, text, or remove the numbers altogether for a handy label holder.
Print face down with support placement set to “touching buildplate.”