Meepo Voyager belt cover

32t pulley version. (36t will be up soon)

This cover is a press fit + Original screws from original pulley cover. When you clip and screw it, there aren't any vibrations.

Real photos you see are from v1, now it's on v3 with some issues I've found fixed.

It works great with PETG. Still pendant to try in ABS (I have only open printers)

Demonstration on how to disassemble and reassemble (sorry, should have chosen a better angle... newbie mistakes) https://youtu.be/oRL9zjsrClY

Expect some rubbing at the beggining, due to the small clearances and 3D printing tolerances, but don't worry, it won't harm anything and wil just sand and fit itself after some km.

It's a so tight fit that may be a bit hard to find the way to put it the first times, buts it's perfectly doable, I attached a link to a video of myself disassembling and reassembling it (should have chosen a better angle, sorry).

The main idea is to avoid breaking belts because of little stones when going offroad (always happens to me, because i'm always drifting and fooling whenever I gent into the dirt).

Still haven't tried on dirt (I actually have my shoulder injuried and a fall would be a really bad thing), so feel free to try, comment and suggest!

I think it would perfectly work on dirt too, bcs there's no clearance for any little stone to get in.

If you want me to print it for you, just DM me, I'm actually selling them for people who can't access to a 3D printer. If you have a different pulley we can try to adjust it too :)

Notes:

I recommend placing a modifier as shown in the image, I found that sometimes that spot can warp.