7 Wonders Box Organizer/Insert - All Expansions

I needed an organizer so that I could put the base game and the Babel expansion in one box. I found the one I remixed that was designed for all expansions. I noted several comments that said that it didn't quite fit their box - slightly too large. When I measured, I found that it was about 3 mm too long in one direction - the direction of the long player board and Armada trays. We'll call that the y-axis.

So, by making thiner walls in several of the trays, I was able to cut 3-5 mm off of the trays in the y-axis and now it fits my box. I also had to cut the 2 long trays into 2 parts to be able to print them on my Creality K1. They were too big for my build plate.

Here are the changes I made from the original -Player board and Armada trays are 3-5 mm shorter -Player board and Armada trays have a 2-part version to be able to print on a smaller print bed -Armada token tray, 7 Wonders token tray, Babel token tray, and Bable tiles tray are all 3-5 mm shorter -Coin trays are 4 separate trays with lids

You'll need to print 4 card trays and lids.

I don't have all of the expansions, so I can't confirm that everything fits in them like it should. I don't think I changed anything that would make a component not fit, but it's possible.

The card tray still needs improvement. There is only one section that is big enough to fit all of the cards from a single age without really forcing the cards in.

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2

Infill:

**Filament:** Anycubic PLA and Amolen silk PLA PLA Mostly black with gold trim

Notes:

How I Designed This ===================

I used Deck in a Box to design the coin trays and lids: https://deckinabox.sgenoud.com

I used TinkerCAD to cut down and split the trays

Category: Games