Mini Slime Creature - Sculptember Model #9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slick slime creature that prints without supports!
- Ocena
- 5 / 5
- Polubienia
- 116
- Pobrania
- 462
- Wydruki
- 23
- Wyświetlenia
- 1313
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
A slick slime creature that prints without supports!
https://youtu.be/z4trnTHZZfA
Printing
- Can be printed in both FDM and resin
- No supports required
- Can be printed without infill
All Sculptember Models
More Customization
Check out the STL Twister by Andrew Sink to put a custom twist on this model.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
Recommended Attribution Text
"Sculptember Mini Slime Creature" (https://3dprinty.xyz/project/133) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).