Maglock bike wall mount (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric secure wall mount for vertically storing your bike.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 262
- Wydruki
- 0
- Wyświetlenia
- 1706
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
So, I have tried bike holders found on many repositories and designed mine myself. But nothing was really doing it for me in terme of ease of use (kids need to be able to use it) and sturdiness.
So I came up with this simple design that holds your bike with a friction fit and locks in place with a lock that stays in place thanks to 3 simple 10 x 3 mm round magnets. If your tires deflate over time, the bike is still secure.
You can use the parametric Fusion360 file provided to design one for your specific bike by changing the tirewidth parameters. Simply enter the measured width of your inflated wheels.
I have provided some tire width but if you need yours just ask here and I'll upload it.
Printed in PLA plus on 0,8 mm nozzle, 25% infill and 3 perimeters. No need for support. Just use CA glue (superglue) to install the 3 magnets (mind the polarity). and screw in your wall using the mounting holes.