1 / 6
ESP32 D1 Mini - LD2422 - battery - 24Ghz mmWave Radar Sensor -  esphome — zdjęcie 1
1 / 6

ESP32 D1 Mini - LD2422 - battery - 24Ghz mmWave Radar Sensor - esphome

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Radar for human body detection for Esphome / Home Assistant.

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
956
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new device to add in your Home Assistant application.

You have several exemples here : https://esphome.io/

This model is created to host a human radar (not IR, but a radar for human body).

List of materials :

  • ESP32 d1 mini
  • Battery shield (to plug a lipo battery)
  • the radar card : HLK-LD2420
  • Lipo battery, example : LP103454, 3.7V 2000mAh 7.4Wh

Print settings:

  • 15% infill 
  • PLA in this example, can be PETG, ABS, …
  • Support needed

In the bottom part : 

  • wall to battery holding
  • esp32 d1 mini and shield holding (not so tight)

in the top part :

  • the squared area permit to host the radar card (LD2420), put a little drop of hot glue.

Link to the 2.4 Ghz mmWave Radar Sensor project page : https://esphome.io/components/sensor/ld2420.html   

Power consumptions :

  • ESP32 d1 mini : 40 mAh
  • LD2422: 50 mAh
  • Lipo of 2000 mAh :  + or - 22 hours (with ESP32 d1 mini + LD2422)

Tagi