Aqara U200 EVVA 4KS deadbolt adapter 10mm + Backplate distancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aqara U200 EVVA 4KS deadbolt adapter 10mm + Backplate distancer between lock and door.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes.
* By the way, it should also fit by diameter the deadbolt of Abloy Protec2, but you will need to adjust inner hole length and retainer hole placement as well.
I tried to print it horizontally and vertically, but decided that Vertical print is more accurate, because adapter preserves linear geometry, when printed horizontally laid it bands by the length and Aqara get harder to spin.
I used PETg for adapter and plate. Tried Nylon for adapter, but shrinkage is to noticable for such a part.
I also made the backplate for Aqara U200 as a base distancer for my door / lock to fully remove the lock covering and fix lock using existed lock cover holes on door. But had to drill holes in metal plate of Aqara itself. You can use 2 side tape as well.
The backplate fits Aqara lock size perfectly with tight fit lock cutout, thickness of mine plate is 4,5mm, you can adjust it if needed for your usage.