Ryan King Pumpkin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little pumpkin created in Blender
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this little pumpkin in Blender by following Ryan King Art's Stylized Hand Painted Pumpkins video. Ryan did an excellent job creating this tutorial, I am fairly new to Blender and I was able to follow along no problem.
I printed my pumpkin with supports sitting flat on his bottom. Turns out, this is not the best orientation. It left a rough area around the bottom, which isn't a big deal because you don't see it. But it also left a flat ring near the top, which you can clearly see in the photo.
I still recommend using supports, but with the pumpkin tilted back a few degrees. Not so far that you need supports on the stem, about 30 degrees will do. Also, consider adding a 5 mm brim to support the second layer, which may have unsupported loops depending on orientation.
The .bgcode file includes the above settings as shown in the screenshot.
Print Settings
Printer Brand: Prusa
Printer: i3 MK4
Rafts: Yes
Supports: Yes
Resolution: 0.2 mm
Infill: 15%
Filament: MatteForge PLA Orange