1 / 6
Foot Repair for Most Slim Dell Inspirons
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I broked the foot so this will fix
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I had broken the foot I don't really remember how. It keeps falling off, so I made this little thing to insert into the foot to hold it on better.
It's not the tightest fit, but it should be fine just to hold it on as is. There is enough tollerance so you can hot glue it if you wanted to.
I trimmed the broken section so you'll need to shave about 2mm downwards of material off I used a small blade and jewelry file.
I printed it in eSUN PLA+ on G10 no brim/skirt
