1 / 1
Bambu filament winder 50tooth gear step — zdjęcie 1

Bambu filament winder 50tooth gear step

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed to modify the 50 tooth drive gear but could only find stl files of it, so remade it in Fusion.

Ocena
0 / 5
Polubienia
10
Pobrania
78
Wydruki
0
Wyświetlenia
583
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a modified 50tooth drive gear with a 6mm hex socket for the drive, it uses an M4x50mm brass standoff as the drive shaft, after I broke the original half way through my first transfer. Also a modified spacer with a collar for the bearings.