Gizmos Marble Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix. Thank you mikevec23 for you initial design.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 1853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
This is a remix. Thank you mikevec23 for you initial design.
I made the improvements that mikevec23 suggested in his original thing.
- Increased the overall size by 5%.
- Graduated the hole in the hopper to make the marble release more reliable.
- Added a stop to the end of the feed shoot to keep marbles from rolling off.
- Shortened the connecting pegs on the base.
- In addition I added the logo.
Please read the print settings and post-printing notes.
Print instructions
Category: Games Print Settings
Printer: Anycubic I3
Rafts: No
Supports: Yes
Resolution: .2
Infill: 10% on Base, 16% on Everything Else
Filament: Anycubic PLA Silver, Blue, White
Notes:
For the base I paused the printing around 80% and changed color (I recommend white as a base to make the marble colors pop). This made for a nice transition to the hopper. I also used supports to ensure the feed hole remained round with no sagging. Be sure to clean out ALL support material.
The logo can be printed as one piece with a pause and color change at 2mm (recommended) or printed separately and then glued together. Center and glue the completed logo to the hopper.
I used super glue for all glue-ups.
Post-Printing
Reaming the hopper.
To make the hopper fit easily on the base I carefully reamed the holes in the bottom of the hopper with a small drill. I recommend you do this gradually and carefully.