Illuminated moon wall lamp - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An illuminated moon of almost half a meter to hang on the wall. Moon surface model is based on the real lunar 3D data.
- Ocena
- 4,857 / 5
- Polubienia
- 991
- Pobrania
- 2624
- Wydruki
- 13
- Wyświetlenia
- 17 175
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of an amazing design bij Martin Kozak. Moon surface model is based on the real lunar 3D data.
I wanted the moon to be larger and more decorative. The moon is now split into four parts and has a diameter of almost half a meter. Additionally, I made a new frame that is less noticeable and matches the modified moon.
I printed the moon pieces flat with a 0.4mm nozzle, using variable layer height with max quality, 15% infill, and 6 top layers to achieve a very nice result.
Materials used:
PLA or PETG
Joint sealant (to fill some small gaps between the pieces of the moon)
Spray paint, gray with glitter (to paint the moon after using the sealant)
LED strip WS2812 (link)
An ESP32 with WLED with this case (same on the photos).
Optional for V1: Inserts for the back part
Print instructions
PLA or PETG
Perimeter: 4
Fill density: 15%
Fill pattern: Gyroid
Support: everywhere & organic
Changelog
V2:
Much stronger border version without needing back support
LED integration is as well much stronger with a sliding rail
V1:
Original version