UPDATED: UT Tower Lighted Number 1 v3

UT Tower lamp with the number 1 and front clock cut out and lighted. Can use a tealight inside, make your own USB powered LED lamp (like this: http://www.aliexpress.us/item/3256806137191821.html), or use the version of the base to set over a LED puck light (this is what I use: https://www.amazon.com/gp/product/B0CJY254S1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1). 

Color combinations that seem to work well: Copper or burnt orange (or the official Pantone 151 orange here: https://www.amazon.com/gp/product/B07S95M6NK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1) tower + Bevo, white base (black also works well if you use a lighter/more translucent color for the tower), clear/transparent number 1 and clock for lights. 

For easier printing I have included a v3 which separates the top and bottom of the tower, as well as a glue guide for everyone OCD, like me. The top of the tower requires supports, and I recommend manual supports by painting them on the 5 internal flat surfaces (see photo instructions). The clock hutches will print without support. The base of the tower will print upside down without supports. 

Alternatively, for the v1 tower: 

The tower should be printed with internal supports (organic worked best for me, 3mf attached - use organic supports, uncheck auto-generate). The print works best if you paint the supports on the internal overhangs only, this will prevent the mass of plastic that the slicer wants to create. Alternatively, I uploaded a 3mf file, in your slicer check supports, uncheck autogenerate, type should be organic.

The base should be printed with supports (grid seems to work best due to the small overhang). The number 1 can be printed as is.